Asbestos Removals Brisbane - Questions To Ask Before Hiring

When choosing an Asbestos removals company in Brisbane, you need to know what you are going to get from them. You need to ask right question to avoid falling into the trap of horror stories that have been rising up about Asbestos removal companies. You will in turn use the crucial information that you will have learnt to select a company that you can trust. Do as much as what you can to assure yourself confidence in the firm to select. Here are some basic questions to ask an Asbestos removal company.

TOP QUESTIONS TO ASK ASBESTOS

 REMOVALIST COMPANY

Ask questions on the following areas;

1. Equipment
2. Insurance
3. Staff
4. Pre-move survey
5. Details
6. Feedback mechanisms

•  PRE-MOVE SURVEY QUESTIONS

1. You should ask the removal company to send a surveyor who is going to confirm on the items to be moved. On coming, you should not hide anything. You should as well discuss your requirements. No one is going to charge you for that visit.
2. Ask on packing services. Are they going to provide the service? Provide them with the information so that they can set aside enough time to do the packing and include in your Quotes so as to make you fully aware of the cost you are going to incur
3. Ask on storage facilities. Do they have enough storage facilities or are they going to recommend somewhere.
4. Do not fail to ask for a written quotation and their fixed prices

• EQUIPMENT RELATED QUESTIONS

1. ASK on the sizes of Lorries and vans that the company has. A large vehicle should be available instead of loading and unloading of vans while waiting
2. Ask the company on the number of packing boxes they will provide in advance. Some provide the boxes as part of the move while others will sell to you. Ensure you ask for the stronger ones; the double walled. Have a small cutter that is going to help you open the boxes. Many companies have wine racks or special book boxes
3. Check out to ensure the removal firm possesses a good supply of all moving equipment. Ensure the company is in a position of locating your home quickly, have blankets that they will use to wrap large furniture’s, mattress covers, hanging wardrobes and the related equipment. The equipment that the company possess is what is going to give the difference between good and bad moves

• INSURANCE QUESTIONS

1. What are the details of their insurance? You should check to ensure you do not have to supplement on the insurance when you have precious items that are not covered by their insurance during the move. Remember, it is only a few household content Insurance that is not covering items which are in transit.
2. Ask to see the V.O.S.A number of the removals. If all you find out that the removal involve operating goods vehicle of certain weight then you should ensure the firm holds an operator’s license that was issued by traffic commissioners for safety and security reasons.

You can check here to get the clear idea about asbestos removal insurance.

•  STAFF QUESTIONS

1. Are the members of staff trained? By who? Remember the body which runs training for removers in Britain is British Association of Removers (B.A.R). The staff should be licensed and qualified.
2. Is their staff uninformed? Get to know if the movers who are going to handle your properties casual, contractors or fully employed by the company. Remember casual workers feel less concerned of the job or are less inclined to worry about your properties. 

• COMPANY DETAILS FUNCTIONS

1. Ask for full Address and landline numbers. For example, cowboy removal companies operate using mobile phones only thus you should get the details at hand.
2. Ask on the mode of payment. How is the company paid? Most reputable and trustworthy firms ask for cheques or credit cards. Some though ask for cash payment.

• FEEDBACK MECHANISMS QUESTIONS

It is worth important to look for genuine feedback from the past customers. This is going to instill confidence on you and assure you of quality work. Go online as well to check on the ratings of the company.

• OTHER QUESTIONS TO ASK

1. What is the custom code of regulation of country that you are moving to?
2. Is the company part of the recognized international trade bodies?
3. What are some of the customers form to fill?
4. What the company Quote include

It is important to employ asbestos removal firm that will make you comfortable as much as they will be handling your properties. The company should be licensed and guaranteed and must provide satisfactory answers to all the questions that you will ask. That will be the right company for you. To learn more on the questions to ask then feel free to call online and get accessed to expert questions in the website http://www.iasbestosremovalbrisbane.com.au/. you can as well send email or make a phone call and a team of dedicated technicians will help you quickly.

Reference Link: http://www.deir.qld.gov.au/asbestos/guidance/homeowners-owner-builders/tips-hiring-a-contractor.htm

Asbestos Removal Queensland - Tips and Advice

When you are removing asbestos the main objective is to keep the dust that is released during the process as minimal as possible. This can be achieved without breaking the sheets, wetting the sheets down with water or spraying the sheets with a PVA glue mixture. The correct removal techniques calls for patience because a lot of individuals while removing asbestos tend to be tempted often breaking the sheet to save on time. When you break the sheet while removing asbestos even if you have watered it down to wet it, the sheet will probably release fibres in the air. On that point you will have no other option rather than breaking the sheeting and in this case dust will find its way to the air through hosing the sheet down as it is broken. 

Moreover, while stacking the sheets after you remove them, you should place them on top of another. Do not slide them against another because the friction caused between sheets will make the fibres to be released even more. 

The following article outlines asbestos removal Queensland - tips and advice

Asbestos Fencing removal 

Asbestos fencing removal to be honest is usually a hard task since hand digging of the sheets is required. In order to do the job properly it requires you to dig out deeper and remove the entire sheet. If in case some or part of the sheet remains intact with the ground when time comes to put the fence asbestos can actually get in the way. More so you must be aware that you cannot deviate around the asbestos as the fence will become crooked. Conversely the neighboring sheet will end up with a bigger backyard and the other one relatively smaller. 

Moreover bolts holding the sheets in place might have rusted and pose difficulty in removing them. You can consider utilizing a powered battery rattle gun which has a flat blade attachment for driver screw to remove them. Also you will have another person or a partner if we call him or her as so on the other side of the fence. They must be having an adjustable spanner that they will use to hold the bolt as the powered battery rattle gun is being used to remove the bolts holding the sheet. To hire asbestos removal experts visit iasbestosremovalbrisbane.com.au

Asbestos cladding removal

Asbestos cladding can be removed using a variety of ways. Basically asbestos cladding usually involves nails removal from the sheeting. These nails can be removed in various means the most popular includes using the following apparatus:

• Nail puller

• Nail punches

• Cold chisel

Nail pullers are the best option to consider for removing nails. They do not tend to crack the sheeting as well as they are a bit faster. However, you must be careful enough since they create dust when removing nails.

Cold chisels usually require you to knock the nail head by use of chisel place next to the nail and hammering over it. It is usually faster if you are removing many nails but it cracks the sheets sometimes.

Nail punches are the cleaner method for nail removal from asbestos but it is a very slow technique. Hammer the punch after you put it on the head of the nail, it drives the nail back into the sheet.

Safety equipment

• Respirator

While choosing the respirators to use during the process you can select from the following:

1. Paper
2. Half face mask
3. Full face mask respirators

If you consider full mask or half face mask respirator you can either opt p2 or p3 filter. A properly worn respirator on full face will provide you with maximum protection than considering a half face mask. This is because the full face mask will not allow asbestos to get to your skin if worn well with an overall.

• Coverall

Make sure that the coverall you are using are highly rated for usage while working with asbestos.

• Boots

Boots for asbestos removal should not be having steel caps or races. The best choice boots for asbestos removal should be steel capped gumboots. This is because you can carry asbestos to your home from your footwear.

• Gloves

Do not use fabric gloves as asbestos will become trapped in the fabric. Consider using dish washing gloves for asbestos removal.

While cleaning and dumping the asbestos make sure you wrap it in black builders plastic. You can find those bags from building stores in Australia. Consider buying 4 meter high and 50 meter long black builder’s plastic as they will give you little job in wrapping the sheets. In addition, depending on the disposal facility you visit remember you will be required to wrap the sheets in groups of three or five or perhaps in bundles of thirty.

References

http://www.safeworkaustralia.gov.au/sites/SWA/about/Publications/Documents/641/How%20to%20Safely%20Remove%20Asbestos.doc

Was Your Home Built Before or During The 1980's You may need Asbestos Removal

Was Your Home Built Before or During The 1980's? You may need Asbestos Removal. Many homes and commercial establishments in Australia built before 1980 were built with cement mixed with asbestos outside, either on roofs, gutters and wall coverings or internally in fittings as a wallpaper component or bonding material on the floor tiles and wall. Although most friable (closely related) Asbestos has been used over time, extreme weather conditions such as heavy rain or strong winds and activities such as demolition and renovation can loosen the material on roofs or gutters blowing of asbestos fibers in the air. When swallowed or inhaled, these particles cause fatal diseases such as 

• Asbestosis 

• Mesothelioma

• A cancer that destroys the membranes of a person’s lungs and abdomen.

Asbestos regulations governing

Asbestos is regulated and controlled under a range of laws and agencies around the world. In Australia, for example, it is within the mandate of the regulations governing Environmental Protection Agency removal of asbestos. The discarding of asbestos waste materials and is supervised by the national emission standards for hazardous air pollutants.

Removal of asbestos waste

Generally, the elimination being the most expensive solution is to be among the last options to be considered unless it is required by local regulations or respective State. Removal poses the greatest risk of fiber being released into the air. However, removal of asbestos may be necessary in some major changes around the house that could end up disturbing the asbestos material. The removal of the asbestos roof can become critical in the case where the asbestos material obtained can be severely damaged and otherwise beyond repair. Removal of asbestos roofs bathroom is complex and must be done by a contractor  of iasbestosremovalbrisbane.com.au with special and appropriate training.

Before you try to do something, you must follow these preparatory steps:

• You must first obtain an asbestos removal control plan (ARCP) and work instructions.

• To ensure the highest standards of safety and compliance of the project, an on-site assessment must be performed. Relevant data can also come from a register of existing asbestos.

• It is necessary that the calculations are made of the required amount of material on the basis of quality requirements, the specifications and drawings.

• The applicable environmental requirements must be identified so that the project can comply with all regulatory requirements.

• Health workers involved in the project must be preserved. Therefore, you must apply all the necessary processes to meet the health surveillance requirements. It also involves monitoring the air.

• Authorization can then be obtained (based on legislative requirements and business) after completing the preparation phase.

• All workers involved in the project must be provided with personal protective equipment (PPE) that is compatible with the job. This equipment must be checked for faults in advance.

Preparing the area and removal

Once the project was approved after the initial preparation phase, a second preparation of the present site is required. These are the following:

• The particular materials containing asbestos must be identified and the register of asbestos checked.

• After identifying the target materials, you can then implement procedures signaling and barricade. This is necessary in delineating work areas on the site; thereby preventing unwarranted access by unauthorized persons.

• Obviously, you should also set up the decontamination unit before starting the project.

• You must also test decontamination procedures, just to be sure of their effectiveness, while avoiding the risk of error.

• Similarly, all equipment and materials to be used in the removal of asbestos-containing material (ACM) is performed before the operation.

• It is extremely important that the adjacent public services are evaluated first. These utilities as power lines and water pipes may require disabling, containment or diversion. This will allow you to avoid unnecessary risks.

• The code of practice and legislation would also require you to advise all occupants in the building, neighbors and others who may be affected by the operation.

You can checkout the asbestos removal information in the following interesting video

Enclosing the removal site

This is the last step involved in the preparation for the removal project. Various activities involved include:

• Most enclosure appropriate type and eliminating the most appropriate, depending on the extent of the removal project.

• As loose products are potentially more dangerous than non-friable products (ACM Solid), strict enclosure procedures are needed.

• Once a particular type of enclosure is selected, you must make sure that the negative air pressure is maintained on the inside, in accordance with legislative requirements. It should also be inspected and smoke tested to ensure that it is completely airtight.

For more information and to keep up to date with iAsbestos Removal you can connect on Linkedin